Areas of Use EDI-CHLOR is a highly concentrated, powerful, stabilised steriliser / disinfectant.  Widely used throughout the food, dairy and brewing industries as a terminal disinfectant to sterilise / disinfect  work surfaces, walls, floors and processing or cutting equipment.  Kills Algae EDI-CHLOR also kills and removes even heavy mould and algae growth from hard surfaces including glass, stainless steel, plastic, concrete and painted or coated surfaces. Antibactericidal Activity EDI-CHLOR contains 140,000 ppm available chlorine.  It has a wide anti-bacterial spectrum and it is effective against most vegetative forms of micro-organisms (excluding mycobacterium). There are no known examples of micro-organisms developing an increased resistance to EDI-CHLOR . Environmentally Safe  EDI-CHLOR does not contain chlorinated solvents or other additives which are not accepted by water Authorities.  After rinsing to drain EDI-CHLOR is readily de-activated.  Foam Control EDI-CHLOR is a non-foaming product, suitable for use in conditions of high pressure and turbulence found in typical C.I.P systems. Method of Use Dilution 1:500 w/w Terminal  Steriliser/Disinfectant For All Surfaces Spray or wash EDI-CHLOR solution over walls, floors and equipment.  Leave to air dry.  Work Surfaces. Utensils  Wipe all food surfaces and utensils with diluted product. Leave to dry.   Soak cutting equipment in dilution solution for approx 1 minute.  Rinse off and dry CIP: Pre-rinse all tanks with cold water.  Make up solutions of EDI-CHLOR with water, allow to circulate for up to 30 minutes then run to waste.  Rinse with clean water and allow to drain. Algae Removal: Make up solution.  Apply to surface using sponge, mop or spray.  Scrub over and rinse off with water. Abattoirs/Catering&Kitchens/FoodIndustry//03/2008 EDI-CHLOR Food Grade Stable Liquid Sodium Hypochlorite Hydra International Limited Cerberian House, Carters Lane,  Kiln Farm, Milton Keynes MK11 3ER, U.K. Tel: 01908-265889   Fax: 01908-262097   Email: sales@hydra-int.com  Web Site: www.hydra-int.com Containing 14-15% Stabilised Sodium Hypochlorite. Non-selective in action.   Edi-Chlor has a wide range of uses  within the Food, Dairy and Brewing industries. Material Safety Data Sheet   All the information on this sheet relates to the concentrated product only, in use dilution will decrease any possible hazard significantly. Manufacturer Hydra International Ltd Cerberian House, Carters Lane, Kiln Farm, Milton Keynes MK11 3ER UK Tel: 01908-265889    Fax: 01908-262097 E-mail:  sales@hydra-international.com    Web Site: www.hydra-int.com 1. IDENTIFICATION Edi-Chlor 2. HAZARDS IDENTIFICATION Product corrosive  3. COMPOSITION A stabilised blend of Sodium Hypochlorite 4. FIRST AID MEASURES EYES Flush with copious amounts of water and seek medical advice SKIN Wash with soap and water INHALATION Not applicable INGESTION In the unlikely event of ingestion seek medical aid immediately Give nothing by mouth to an unconscious person 5. FIRE HAZARD & FIRE FIGHTING PROCEDURES Non flammable 6. ACCIDENTAL RELEASE MEASURES SMALL SPILLS Wash away with water LARGE SPILLS Cover with sand and earth.  Pickup and hold for waste disposal 7. HANDLING AND STORAGE Closed containers above 5 oC 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION RESPIRATORY PROTECTION Not applicable VENTILATION Not applicable PROTECTIVE GLOVES Wear PVC or Rubber Gloves EYE PROTECTION Wear goggles OCCUPATIONAL EXPOSURE LIMIT Not applicable 9. PHYSICAL AND CHEMICAL PROPERTIES PHYSICAL STATE Liquid COLOUR Pale Green ODOUR Alkaline FLASHPOINT Non Flammable SOLUBILITY Water Soluble SPECIFIC GRAVITY 1.275 + -0.01 @ 20 oC 10. STABILITY & REACTIVITY DATA CHEMICAL REACTIVITY Reacts as an Alkali STORAGE STABILITY Stable INCOMPATIBILITY Acids and Acidic Material HAZARDOUS DECOMPOSITION Chlorine fumes AND COMBUSTION PRODUCTS 11. TOXICOLOGICAL INFORMATION EYES Corrosive SKIN Corrosive INHALATION Not applicable INGESTION Harmful/Corrosive 12. ECOLOGICAL INFORMATION Not classified as dangerous to the environment 13. DISPOSAL CONSIDERATION As per current rules of local authority 14. TRANSPORTATION INFORMATION Contains Sodium Hypochlorite        Corrosive.       Packing Group II       UN 1791 15. REGULATORY INFORMATION                                                                  RISK PHRASES SAFETY PHRASES   HAZARD SYMBOL LABELLING INFORMATION Contains 14/15% Sodium Hypochlorite R34 Causes burns S24/25 Avoid contact with skin and eyes S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice S27 Take off immediately all contaminated clothing S36/37/39 Wear suitable protective clothing, gloves and eye/face protection S45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) Corrosive 16. OTHER INFORMATION 1st September 2007 The information contained in this document is provided in accordance with the requirements of Chemicals (Hazard Information & Packing) Regulations.  The product should not be used for any purpose other than as stated on the label without obtaining specific written instructions directly from the supplier’s Head Office.  As specific conditions of use are out- side the supplier’s control the user is responsible for ensuring the requirements of relevant legislation are complied with.  The user assumes all liability for damage or injury caused from abnormal use, failure to follow recommended practices & any hazard inherent in the nature of the product.