PASSIVATED SURFACE    ABSOLUTE actually conditions the metal while it cleans, it leaves a passivated surface through chemically controlled methods.   Ideal for aluminium window frames to remove oxidised salts. SAFE TO USE   Safe to use on aluminium, steel, iron, brass, copper, bronze, lead and cadium plate, non-flammable.  Safe on rubber,  plastic and nitrite.  USED BY     Double Glazing Installers, Plating Shops, Polishing Depts, Foundries, Sheet Metal Shops, Garages, etc. VERSATILE  Can be used in tank for soak method or by brush or swab method. METHOD OF USE  Can be used hot or cold. First clean off excess grease and oil. Dilute ABSOLUTE with up to 3 parts water. MOP METHOD   Apply the solution by mop or brush. Allow ABSOLUTE to remain in contact with the metal until all the corrosion and rust has been dissolved.  Remove articles and rinse with clean water, preferably under pres- sure.  Allow to dry and apply protective coating. SOAK METHOD Fill plastic tank with diluted solution.  Lower article to be cleaned into tank. Allow articles to remain until all contamination and corrosion has dissolved. Remove articles and rinse with clean water, preferably under pressure.  Allow to dry and apply to protective coating. CLEANING VERY HEAVY LAYERS OF COMPACTED DIRT 1) Apply neat ABSOLUTE to floor  or surface to be cleaned and allow to        penetrate for 30-40 minutes.   2)  Agitate with a stiff broom, then when you can see the original floor       surface. 3) Simply rinse away with clean water. DoubleGlazing/03/2008 ABSOLUTE Metal Cleaner, Etchant & Floor Cleaner Hydra International Limited Cerberian House, Carters Lane,  Kiln Farm, Milton Keynes MK11 3ER, U.K. Tel: 01908-265889   Fax: 01908-262097   Email: sales@hydra-int.com  Web Site: www.hydra-int.com Powerful cleaner designed to degrease and etch in one easy operation.   Used on metal parts prior to applying paint and other protective coatings. Also acts as an outstanding floor cleaner for compacted grease. Material Safety Data Sheet   All the information on this sheet relates to the concentrated product only, in use dilution will decrease any possible hazard significantly. Manufacturer Hydra International Ltd Cerberian House, Carters Lane, Kiln Farm, Milton Keynes MK11 3ER UK Tel: 01908-265889    Fax: 01908-262097 E-mail:  sales@hydra-int.com    Web Site: www.hydra-int.com 1. IDENTIFICATION Absolute 2. HAZARDS IDENTIFICATION Irritant 3. COMPOSITION An aqueous blend of Non-ionic Surfactants, Phosphoric and Hydrochloric Acids and Glycol Ether.   4. FIRST AID MEASURES EYES Flush with copious amounts of water and seek medical advice SKIN Wash with soap and water INHALATION Seek fresh air INGESTION In the unlikely event of ingestion seek medical aid immediately Give nothing by mouth to an unconscious person 5. FIRE HAZARD & FIRE FIGHTING PROCEDURES Non flammable 6. ACCIDENTAL RELEASE MEASURES SMALL SPILLS Wash away with large amounts of water LARGE SPILLS Contain and cover spillage with neutralizing agent (Soda Ash). Pick up and hold for waste disposal 7. HANDLING AND STORAGE Closed containers above 5 o C.  Do not mix with other chemicals 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION RESPIRATORY PROTECTION Not applicable VENTILATION Use with adequate ventilation PROTECTIVE GLOVES Wear PVC or Rubber Gloves EYE PROTECTION Wear goggles if task or application method could result in eye contact from accidental splash or spray OCCUPATIONAL EXPOSURE LIMIT None 9. PHYSICAL AND CHEMICAL PROPERTIES PHYSICAL STATE Liquid COLOUR Straw ODOUR Acidic FLASHPOINT Non Flammable SOLUBILITY Water Soluble SPECIFIC GRAVITY 1.100 + -0.01 @ 20 oC 10. STABILITY & REACTIVITY DATA CHEMICAL REACTIVITY Reacts as an acid STORAGE STABILITY Stable INCOMPATIBILITY Do not mix with bleach or other chemicals HAZARDOUS DECOMPOSITION Toxic fumes may be produced AND COMBUSTION PRODUCTS 11. TOXICOLOGICAL INFORMATION EYES Corrosive SKIN Irritant INHALATION Irritant INGESTION Harmful 12. ECOLOGICAL INFORMATION Not classified as dangerous to the environment  13. DISPOSAL CONSIDERATION As per current rules of local authority 14. TRANSPORTATION INFORMATION Not dangerous for transport  15. REGULATORY INFORMATION                                                             RISK PHRASES                                                            SAFETY PHRASES                                                           HAZARD SYMBOL LABELLING INFORMATION R36/38 Irritating to eyes and skin S24/25 Avoid contact with skin and eyes S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice Irritant 16. OTHER INFORMATION 1st September 2007 The information contained in this document is provided in accordance with the requirements of Chemicals (Hazard Information & Packing) Regulations.  The product should not be used for any purpose other than as stated on the label without obtaining specific written instructions directly from the supplier’s Head Office.  As specific conditions of use are out- side the supplier’s control the user is responsible for ensuring the requirements of relevant legislation are complied with.  The user assumes all liability for damage or injury caused from abnormal use, failure to follow recommended practices & any hazard inherent in the nature of the product.