FRAME CLEAN  Safety Solvent Cleaner Multi-Use Safe Frame Clean Unlike some degreasing solvents, Frame Clean is safe on PVC-u,  Plastics, metals, paints, powder coatings, resins, plastics and elastomers.   Frame Clean  will not degrade or attack PVC-u and is  ideal for powder coated aluminium and PVC-u frames. Used by “Trade Frame Manufactures” and installers. Safety De-Greaser, Fast Drying.  Leaves cleaned surfaces dry and smear free Rapidly removes excess sealants including (1 and 2 part products) without effecting the powder coating colour on painted frames.  Frame Clean removes pen and pencil markings, oil, grease, creosote, tar and grime from glass, PVC-u, powder coatings, plastics and most hard surfaces. Frame Clean Tests.  No Effect at room temperature:  10 minute contact time Polyvinyl Chloride (PVC-u),  Polyvinylidene Flouride (PVDF),  Stainless Steel,  Tetrafluoroethylene (TFE),  Vinylidene  fluoride (VDF or VF2). Acetal (Delrin),  Aluminium, Buna N (nitrile),  Chlorosulfonated polyethylene (CSPE), Epoxy;  Epoxide (EP),  Ethylene Propylene Terpolymer Rubber (EPDM),  Fluorinated  ethylene propylene (FEP),  Hexafluoropropylene (HFP),  High Density Polyethylene HDPE),  Low Density Polyethylene (LDPE), Natural Rubber,  Noryl,  Neoprene,  Perfluoroalkoxy (PFA),  Perfluoroelastomer; Kalrez (FFKM),   Perfluoromethylvinylether (PMVE),  Polyamide; Nylon (PA), Polyethylene Terephthalate (PET), Polymethylmethacrylate PMMA),  Polypropylene (PP),   Polystyrene (PS), Polytetrafluoroethylene (PTFE),   Directions For Use Cold wipe FRAME CLEAN over article to be cleaned. Wipe off using clean cloth or paper, replacing as necessary. No need to rinse as FRAME CLEAN will readily evaporate. Frame Clean is packed in 1 litre and 5 litre containers                                                                                                                                                                                                                                               DoubleGlazing03/2008 Hydra International Limited Cerberian House, Carters Lane,  Kiln Farm, Milton Keynes MK11 3ER, U.K. Tel: 01908-265889   Fax: 01908-262097   Email: sales@hydra-int.com  Web Site: www.hydra-int.com Removes Excess Elastomer and 1 & 2 part Sealants Cleans & Degreases PVC-u, Powder Coated & Anodised Surfaces  Material Safety Data Sheet   All the information on this sheet relates to the concentrated product only, in use dilution will decrease any possible hazard significantly. Manufacturer          Hydra International Ltd Cerberian House, Carters Lane, Kiln Farm, Milton Keynes MK11 3ER UK Tel: 01908-265889    Fax: 01908-262097 E-mail:  sales@hydra-int.com     Web Site: www.hydra-int.com 1. IDENTIFICATION Frame Clean 2. HAZARDS IDENTIFICATION Highly Flammable, Irritant 3. COMPOSITION Solvent blend containing isopropanol and non-ionic surfactants 4. FIRST AID MEASURES EYES Flush with copious amounts of water and seek medical advice SKIN Wash with soap and water INHALATION Seek fresh air INGESTION In the unlikely event of ingestion seek medical aid immediately Give nothing by mouth to an unconscious person 5. FIRE HAZARD & FIRE FIGHTING PROCEDURES FLASHPOINT 12 oC FIRE FIGHTING Carbon Dioxide, Dry Chemical, Foam, Sand or Earth FLAMMABLE LIQUID DO NOT USE: Water 6. ACCIDENTAL RELEASE MEASURES Eliminate all sources of ignition and ventilate area.  Contain spillages with earth, sand or granules.  Pick up and hold for waste disposal 7. HANDLING AND STORAGE Closed containers above 5 o C.  Store away from sources of ignition 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION RESPIRATORY PROTECTION Not applicable VENTILATION Use in well ventilated area PROTECTIVE GLOVES Not applicable EYE PROTECTION Wear goggles if task or application method could result in eye contact from accidental splash or spray OCCUPATIONAL EXPOSURE LIMIT UK EH40 OES 400ppm (980mg/m3) 8 HR to TWA UK EH40 OES 500ppm (1225 mg/m3) 10 min TWA 9. PHYSICAL AND CHEMICAL PROPERTIES PHYSICAL STATE Liquid COLOUR Water White ODOUR Solvent FLASHPOINT 12 oC SOLUBILITY Soluble in water SPECIFIC GRAVITY 0.800 + -0.01 @20 oC 10. STABILITY & REACTIVITY DATA CHEMICAL REACTIVITY Not applicable STORAGE STABILITY Stable INCOMPATIBILITY None HAZARDOUS DECOMPOSITION Toxic fumes of Carbon Monoxide and AND COMBUSTION PRODUCTS Carbon Dioxide 11. TOXICOLOGICAL INFORMATION EYES Irritant SKIN Not applicable INHALATION Irritant INGESTION Harmful 12. ECOLOGICAL INFORMATION Not classified as dangerous to the environment 13. DISPOSAL CONSIDERATION As per current rules of local authority 14. TRANSPORTATION INFORMATION Flammable Liquid.    Packing Group II       UN 1219    Isopropanol 15. REGULATORY INFORMATION                                                                     RISK PHRASES SAFETY PHRASES HAZARD SYMBOL LABELLING INFORMATION R11 Highly flammable R36 Irritating to eyes S16 Keep away from sources of ignition – NO SMOKING S25 Avoid contact with eyes S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice S51 Use only in well ventilated areas S9 Keep container in a well ventilated place High Flammable and Irritant 16. OTHER INFORMATION 1st April 2007 The information contained in this document is provided in accordance with the requirements of Chemicals (Hazard Information & Packing) Regulations.  The product should not be used for any purpose other than as stated on the label without obtaining specific written instructions directly from the supplier’s Head Office.  As specific conditions of use are out- side the supplier’s control the user is responsible for ensuring the requirements of relevant legislation are complied with.  The user assumes all liability for damage or injury caused from abnormal use, failure to follow recommended practices & any hazard inherent in the nature of the product.