![]() Why Disinfect Water Holding Vessels?
Water taken from the mains is generally clean, however once it is held in storage tanks
bacteria and micro-organisms in the water thrive, contaminating the water and causing
bio-film within the tank.
If water is pulled from sources such as ponds or water tanks, the water quality will
already be compromised with harmful bacteria and other micro-organisms already
present.
Stale or contaminated water is a breeding ground for many types of water borne bacteria and viruses including:
Legionellosis, E.Coli and Hepatitis A; all can lead to infection when ingested or inhaled via the respiratory tract
when water is sprayed from fire sprinklers, showers and fire hoses.
Bio-Blast keeps Tanks Clean, Sterile & Destroys Offensive Odours
Bio-Blast breaks down micro-organisms which produce bio-film and algae slime within water tanks.
By regular treatment using Bio-Blast, tanks are kept free of bio-film and water is kept clean and fresh.
Note: Contaminated water may not carry bad odours, however if water does smell it is a sure sign that it is
contaminated and the tank must be cleaned and disinfected using Bio-Blast.
Non Corrosive
Bio-Blast is non-caustic and non-toxic. Safe for use on all surfaces including sealed, painted and un-painted metals,
plastic, rubber and synthetic materials.
Effective Against a Broad Spectrum of Bacteria, Yeast Moulds and Viruses including
Legionellosis (Legionella pheumophilia) E. Coli, Hepatitis A, Norwark Virus, Staphylococcus sp, Proteus Vulgaris,
Escherichia sp, Lactobacillus sp, Pseudomonas sp, Corynebacterium diphtherias, Streptococcus pneumonia,
Salmonella typhosa, Serratia marcescens, Mycobacterium tuberculosis, Spiroplasma sp, Clostridium sp,
Trichophyton gypseum, Coccidioides immitis, Histoplasma capsulatum, Penicillium tardum, Poliovirus type1,
Coxsackie B-1, Vaccinia, Cryptosporidium, Shigella, Giardia, Amebiasis
Method of Use Dilutions
1/2 litre treats 180 litres water, 1 litre treats 360 litre water, 5 litre treats 1,800 litres water (1 Fire Appliance).
Add Bio-Blast directly into water inlet tank or water tank. Top up with water to fill level as required.
If bad odours present or water is suspect leave solution in tank for 3 hours and purge system.
For fire appliances treated water can be used if necessary rather than purging.
Repeat dose of Bio-Blast into clean tank and refill with water. If tank is clean this solution can be left in situ.
No need to drain appliance.
Continued Protection
Re-treat appliance or water tanks every 3 months or sooner in extreme heat conditions.
Fire & Rescue03/2008
Bio-Blast
Wide Spectrum Water Steriliser / Cleaner
Destroys Bio-Film, Bacteria, Viruses & Micro-Organisms
found in Water Tanks, Fire Appliances, Hoses & Sprinkler Systems
Air Conditioning Plants & Cooling Towers
Hydra International Limited
Cerberian House, Carters Lane,
Kiln Farm, Milton Keynes MK11 3ER, U.K.
Tel: 01908-265889 Fax: 01908-262097
Email: sales@hydra-int.com Web Site: www.hydra-int.com
![]() Manufacturer
Hydra International Ltd
Cerberian House, Carters Lane, Kiln Farm, Milton Keynes MK11 3ER UK
Tel: 01908-265889 Fax: 01908-262097
E-mail: sales@hydra-int.com Web Site: www.hydra-int.com
Material Safety Data Sheet
All the information on this sheet relates to the concentrated product only. In use dilution will significantly decrease any possible hazard.
1.
IDENTIFICATION
Bio-Blast
2.
COMPOSITION
An aqueous blend of biocides and alkalis
3.
HAZARDS IDENTIFICATION
Product is an irritant
4.
FIRST AID MEASURES
EYES
Flush with copious amounts of water and seek medical advice
SKIN
Wash with soap and water
INHALATION
Seek fresh air
INGESTION
In the unlikely event of ingestion seek medical aid immediately
Give nothing by mouth to an unconscious person
5.
FIRE HAZARD &
FIRE FIGHTING PROCEDURES
Non flammable
6.
ACCIDENTAL RELEASE
MEASURES
SMALL SPILLS
Wash away with large amounts of water
LARGE SPILLS
Contain and cover spillage with absorbent granules
Pick up and hold for waste disposal
7.
HANDLING AND STORAGE
Closed containers above 5
o
C. Do not mix with other chemicals
8.
EXPOSURE CONTROLS AND
PERSONAL PROTECTION
RESPIRATORY PROTECTION
Not applicable
VENTILATION
Not applicable
PROTECTIVE GLOVES
Wear PVC or Rubber Gloves
EYE PROTECTION
Wear goggles if task or application method could result in eye
contact from accidental splash or spray
OCCUPATIONAL EXPOSURE LIMIT
None
9.
PHYSICAL AND CHEMICAL
PROPERTIES
PHYSICAL STATE
Liquid
COLOUR
Pink
ODOUR
Slight
FLASHPOINT
Non Flammable
SOLUBILITY
Water Soluble
SPECIFIC GRAVITY
1.040 + -0.01 @ 20
oC
10.
STABILITY & REACTIVITY DATA
CHEMICAL REACTIVITY
Stable
STORAGE STABILITY
Stable
INCOMPATIBILITY
None
HAZARDOUS DECOMPOSITION
None
AND COMBUSTION PRODUCTS
11.
TOXICOLOGICAL INFORMATION
EYES
Irritant
SKIN
Irritant
INHALATION
Irritant
INGESTION
Harmful
12.
ECOLOGICAL INFORMATION
Not classified as dangerous to the environment
13.
DISPOSAL CONSIDERATION
As per current rules of local authority
14.
TRANSPORTATION INFORMATION
Not dangerous for transport
15.
REGULATORY INFORMATION
RISK PHRASES
SAFETY PHRASES
HAZARD SYMBOL
LABELLING INFORMATION
R36/38
Irritating to eyes and skin
R43
May cause sensitization by skin contact
S24/25
Avoid contact with skin and eyes
S26
In case of contact with eyes rinse immediately with plenty of water and seek medical advice
S37
Wear suitable gloves
Irritant
16.
OTHER INFORMATION
8th April 2007
The information contained in this document is provided in accordance with the requirements of Chemicals (Hazard Information & Packing) Regulations. The product should not be
used for any purpose other than as stated on the label without obtaining specific written instructions directly from the suppliers Head Office. As specific conditions of use are out-
side the suppliers control the user is responsible for ensuring the requirements of relevant legislation are complied with. The user assumes all liability for damage or injury caused
from abnormal use, failure to follow recommended practices & any hazard inherent in the nature of the product.
|