FAST ACTING BOSS is based on an organic acid non-ionic surfactants which provide fast wetting and penetration for the rapid removal of inorganic deposits, from most surfaces. SAFE BOSS solutions when applied according to directions are harmless to stainless steel, aluminium, copper, brass, bronze and lead surfaces, non-flammable. PASSIVATED SURFACE BOSS actually conditions the metal while it cleans, it leaves a passivated   surface through chemically controlled methods. DILUTION RATE Use 2—20% solution with water, depending upon the degree and type of deposit to be removed. HOW TO USE MOP METHOD 1. Apply to diluted solution by mop or brush. 2. Allow to remain in contact with the surface to be cleaned until all the contamination has been        dissolved. 3. Rinse with clean water and allow to dry. SOAK METHOD 1. Fill plastic tank with diluted solution. 2. Lower article to be cleaned into tank. 3. Allow articles to remain until all contamination and corrosion has been dissolved. 4. Remove articles and rinse with clear water, preferably under pressure, and allow to dry. N.B. Do not use with HYPOCHLORITE solutions or any other chemical. FoodIndustry/03/2008 BOSS Powerful & Safe Heavy Duty Scale Remover Hydra International Limited Cerberian House, Carters Lane,  Kiln Farm, Milton Keynes MK11 3ER, U.K. Tel: 01908-265889   Fax: 01908-262097   Email: sales@hydra-int.com  Web Site: www.hydra-int.com Heavy duty acid descaler, designed for the rapid removal of  milk stone, beer stone, protein scale, water scale, tannin stains, rust, etc.,  Material Safety Data Sheet   All the information on this sheet relates to the concentrated product only, in use dilution will decrease any possible hazard significantly. Manufacturer Hydra International Ltd Cerberian House, Carters Lane, Kiln Farm, Milton Keynes MK11 3ER UK Tel: 01908-265889    Fax: 01908-262097 E-mail:  sales@hydra-int.com    Web Site: www.hydra-int.com 1. IDENTIFICATION Boss 2. HAZARDS IDENTIFICATION Corrosive 3. COMPOSITION An aqueous blend of phosphoric and hydrochloric acids, cationic and non-ionic surfactants and glycol ether 4. FIRST AID MEASURES EYES Flush with copious amounts of water and seek medical advice SKIN Wash with soap and water INHALATION Not applicable INGESTION In the unlikely event of ingestion seek medical aid immediately Give nothing by mouth to an unconscious person 5. FIRE HAZARD & FIRE FIGHTING PROCEDURES Non flammable 6. ACCIDENTAL RELEASE MEASURES SMALL SPILLS Wash away with water LARGE SPILLS Cover with sand and earth.  Pickup and hold for waste disposal 7. HANDLING AND STORAGE Closed containers above 5 oC 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION RESPIRATORY PROTECTION Wear respirator VENTILATION Use in well ventilated area PROTECTIVE GLOVES Wear PVC or Rubber Gloves EYE PROTECTION Wear goggles OCCUPATIONAL EXPOSURE LIMIT Not applicable 9. PHYSICAL AND CHEMICAL PROPERTIES PHYSICAL STATE Liquid COLOUR Water White ODOUR Acid FLASHPOINT Non Flammable SOLUBILITY Water Soluble SPECIFIC GRAVITY 1.198 + -0.01 @ 20 oC 10. STABILITY & REACTIVITY DATA CHEMICAL REACTIVITY Reacts as an Acid STORAGE STABILITY Stable INCOMPATIBILITY Alkali Material HAZARDOUS DECOMPOSITION None AND COMBUSTION PRODUCTS 11. TOXICOLOGICAL INFORMATION EYES Corrosive SKIN Corrosive INHALATION Irritant INGESTION Harmful/Corrosive 12. ECOLOGICAL INFORMATION Not classified as dangerous to the environment  13. DISPOSAL CONSIDERATION As per current rules of local authority 14. TRANSPORTATION INFORMATION Contains Phosphoric Acid..        Corrosive.       Packing Group II        UN 1824 15. REGULATORY INFORMATION                                                                          RISK PHRASES                                                                          SAFETY PHRASES                                                                          HAZARD SYMBOL LABELLING INFORMATION Contains 33% Phosphoric Acid R34 Causes burns S24/25 Avoid contact with skin and eyes S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice S27 Take off immediately all contaminated clothing S36/37/39 Wear suitable protective clothing, gloves and eye/face protection S45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) Corrosive 16. OTHER INFORMATION 1st January 2008 The information contained in this document is provided in accordance with the requirements of Chemicals (Hazard Information & Packing) Regulations.  The product should not be used for any purpose other than as stated on the label without obtaining specific written instructions directly from the supplier’s Head Office.  As specific conditions of use are out- side the supplier’s control the user is responsible for ensuring the requirements of relevant legislation are complied with.  The user assumes all liability for damage or injury caused from abnormal use, failure to follow recommended practices & any hazard inherent in the nature of the product.