Rapid Steriliser & Algae, Slime, Moss Black Mould Remover Edi-Chlor ACR is used extensively where animals, mammals, primates, birds and reptiles housed, as a total steriliser or to remove even the heaviest build-up of contamination from all surfaces.  Edi-Chlor ACR removes black mould and algae / slime from stainless steel, glass, plastic, concrete, wood and painted or coated walls, cages, runs, paths and pools.    Fast Acting Edi-Chlor ACR rapidly breaks down the fibrous root structure of algae, mould or moss, breaking the bond holding the contamination to the surface.  Once the algae is dead it is easily rinsed away ensuring a clean, slip free surface.  Edi-Chlor ACR also removes staining caused by algae bacteria from painted, glass, tiled or plastic walls.  Leaves surfaces clean and sanitised. Environmentally Safe  Edi-Chlor ACR does not contain chlorinated solvents or other additives which are not accepted by water authorities and after being washed to drain Edi-Chlor ACR is readily de-activated.  When used around animals, mammals, primates, birds or reptiles ensure that they do not come into contact with  Edi-Chlor ACR, however they can be safely returned to the area once the area has been rinsed clean. Method of Use: Runs, Cage Floors, Pools, Paths In extreme algae / slime build-up Edi-Chlor ACR can be used neat, however the normal dilution is between 1:10 to 1:40.  Make up solution.  Apply to surface using watering can or bucket.  Mop over or use deck scrubber to remove the build-up.  Leave for 5-10 minutes depending upon build-up.  Rinse off with plenty of water until contamination has been removed.  In extreme conditions a second application may be required.  Walls, Glass and other Vertical surfaces:  Make up solution 1:10 to 1:40 w/w.  Wash over surface using sponge or cloth.  Use scrubbing brush if contamination very heavy.  Rinse off with water. N.B.  Edi-Chlor ACR should only used to remove algae / slime build-up.  For daily disinfecting and cleaning we recommend Hydra Annihilate ACR. For deep cleaning Hydra Powerwash ACR.                                                               ZoosKennelsCatteriesVets/04/2008 Edi-Chlor ACR Stabilised Cleaner & Steriliser  Fast Acting, Non Foaming  Algae, Slime, Moss and Black Mould Remover  Hydra International Limited Cerberian House, Carters Lane,  Kiln Farm, Milton Keynes MK11 3ER, U.K. Tel: 01908-265889   Fax: 01908-262097   Email: sales@hydra-int.com  Web Site: www.hydra-int.com Material Safety Data Sheet   All the information on this sheet relates to the concentrated product only, in use dilution will decrease any possible hazard significantly. Manufacturer Hydra International Ltd Cerberian House, Carters Lane, Kiln Farm, Milton Keynes MK11 3ER UK Tel: 01908-265889    Fax: 01908-262097 E-mail:  sales@hydra-int.com    Web Site: www.hydra-int.com 1. IDENTIFICATION Edi-Chlor ACR 2. HAZARDS IDENTIFICATION Corrosive  3. COMPOSITION A stabilised blend of Sodium Hypochlorite 4. FIRST AID MEASURES EYES Flush with copious amounts of water and seek medical advice SKIN Wash with soap and water INHALATION Not applicable INGESTION In the unlikely event of ingestion seek medical aid immediately Give nothing by mouth to an unconscious person 5. FIRE HAZARD & FIRE FIGHTING PROCEDURES Non flammable 6. ACCIDENTAL RELEASE MEASURES SMALL SPILLS Wash away with water LARGE SPILLS Cover with sand and earth.  Pickup and hold for waste disposal 7. HANDLING AND STORAGE Closed containers above 5 oC 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION RESPIRATORY PROTECTION Not applicable VENTILATION Not applicable PROTECTIVE GLOVES Wear PVC or Rubber Gloves EYE PROTECTION Wear goggles OCCUPATIONAL EXPOSURE LIMIT Not applicable 9. PHYSICAL AND CHEMICAL PROPERTIES PHYSICAL STATE Liquid COLOUR Pale Green ODOUR Alkaline FLASHPOINT Non Flammable SOLUBILITY Water Soluble SPECIFIC GRAVITY 1.275 + -0.01 @ 20 oC 10. STABILITY & REACTIVITY DATA CHEMICAL REACTIVITY Reacts as an Alkali STORAGE STABILITY Stable INCOMPATIBILITY Acids and Acidic Material HAZARDOUS DECOMPOSITION Chlorine fumes AND COMBUSTION PRODUCTS 11. TOXICOLOGICAL INFORMATION EYES Corrosive SKIN Corrosive INHALATION Not applicable INGESTION Harmful/Corrosive 12. ECOLOGICAL INFORMATION Not classified as dangerous to the environment 13. DISPOSAL CONSIDERATION As per current rules of local authority 14. TRANSPORTATION INFORMATION Contains Sodium Hypochlorite        Corrosive.       Packing Group II       UN 1791 15. REGULATORY INFORMATION                                                                  RISK PHRASES SAFETY PHRASES   HAZARD SYMBOL LABELLING INFORMATION Contains 14/15% Sodium Hypochlorite R34 Causes burns S24/25 Avoid contact with skin and eyes S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice S27 Take off immediately all contaminated clothing S36/37/39 Wear suitable protective clothing, gloves and eye/face protection S45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) Corrosive 16. OTHER INFORMATION 1st April 2008 The information contained in this document is provided in accordance with the requirements of Chemicals (Hazard Information & Packing) Regulations.  The product should not be used for any purpose other than as stated on the label without obtaining specific written instructions directly from the supplier’s Head Office.  As specific conditions of use are out- side the supplier’s control the user is responsible for ensuring the requirements of relevant legislation are complied with.  The user assumes all liability for damage or injury caused from abnormal use, failure to follow recommended practices & any hazard inherent in the nature of the product.