Hydra FURY has been designed as a spot cleaner to rapidly remove silver build-up from racks and rollers.  Simply wipe or foam FURY over racks and rollers and tank sides to remove silver build-up.  Once applied use a sponge, cloth or soft brush to wipe contamination off the surface and rinse with water. For deep cleaning see data sheet on Hydra DSC-100 Developer Systems Cleaner. RACKS & ROLLERS  Remove ranks from tank.  Rinse off processing chemicals and drain to chemical waste tank.  Either foam or wipe FURY over Rollers, turning Rollers to ensure total        saturation. Leave until contamination is dissolved.  Wipe residue off with cloth or sponge. Once components are clean, rinse with clean water and drain to chemical waste tank. Note: To remove oxidised developer / silver in soak application on developer rack / developer tank use Hydra DSC-100 deep silver remover in a soak        application TANK CLEANING  Drain and thoroughly rinse chemical tank into chemical waste tank.  Wipe FURY over tank sides to remove residue.  Rinse tank thoroughly before adding fresh processing chemicals. Note: For soak application on developer rack/ developer tank use       Hydra DSC-100 deep silver/oxidised developer remover in soak application Note: Always read Product label before use.  Although FURY does not have a strong odour ALWAYS use in well ventilated areas as chemical reaction when FURY removes contamination it can cause strong odours.  Mini Labs/04/2008 FURY Hydra International Limited Cerberian House, Carters Lane,  Kiln Farm, Milton Keynes MK11 3ER, U.K. Tel: 01908-265889   Fax: 01908-262097   Email: sales@hydra-int.com  Web Site: www.hydra-int.com Unique formulation Wipes off Silver build-Up  From Racks & Roller in Minutes. Fury STOPS Scratched film or marks on prints. STOPS Slipping and jamming of  rollers. STOPS Tram lines or flakes on  finished work. Removes Silver Deposits from Racks & Rollers  Material Safety Data Sheet    All the information on this sheet relates to the concentrated product only, in use dilution will decrease any possible hazard significantly. Manufacture        Hydra International Ltd Cerberian House, Carters Lane, Kiln Farm, Milton Keynes MK11 3ER UK Tel: 01908-265889   Fax: 01908-262097 E-mail:  sales@hydra-int.com    Web Site: www.hydra-int.com 1. IDENTIFICATION Fury 2. COMPOSITION An aqueous blend of Sulphuric and nitric acids with non-ionic surfactants 3. HAZARDS IDENTIFICATION Product corrosive to all body tissue 4. FIRST AID MEASURES EYES Flush with copious amounts of water and seek medical advice SKIN Wash with soap and water and see medical advice INHALATION Seek fresh air and medical advice INGESTION In the unlikely event of ingestion seek medical aid immediately Give nothing by mouth to an unconscious person 5. FIRE HAZARD & FIRE FIGHTING PROCEDURES Non flammable 6. ACCIDENTAL RELEASE MEASURES SMALL SPILLS Wash away with large volumes of water Caution as heat will be generated LARGE SPILLS Contain and cover spillage with neutralizing agent (Soda Ash) Pickup and hold for waste disposal Do not allow large spillages to enter public drains or waterways 7. HANDLING AND STORAGE Closed containers above 5 o C.  Do not mix with other chemicals. Never add water to this product.  Pour Fury into water not the other way round 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION RESPIRATORY PROTECTION Not applicable VENTILATION Use adequate ventilation PROTECTIVE GLOVES Wear PVC or strong Rubber Gloves EYE PROTECTION Wear full face protection BODY PROTECTION Wear acid resistant overalls OCCUPATIONAL EXPOSURE LIMIT Long term exposure limit (8 hour TWA reference period): 3mg cubic metre 9. PHYSICAL AND CHEMICAL PROPERTIES PHYSICAL STATE Liquid COLOUR Straw ODOUR Acidic FLASHPOINT Non Flammable SOLUBILITY Water Soluble (reacts violently) SPECIFIC GRAVITY 1.228 + -0.01 @ 20 oC 10. STABILITY & REACTIVITY DATA CHEMICAL REACTIVITY Reacts as strong acid STORAGE STABILITY Stable INCOMPATIBILITY Violent reactions with oxidising materials and alkalis.   HAZARDOUS DECOMPOSITION Toxic fumes may be produced AND COMBUSTION PRODUCTS 11. TOXICOLOGICAL INFORMATION EYES Corrosive SKIN Corrosive INHALATION Irritant INGESTION Harmful/Corrosive 12. ECOLOGICAL INFORMATION Not classified as dangerous to the environment 13. DISPOSAL CONSIDERATION As per current rules of local authority 14. TRANSPORTATION INFORMATION Contains Sulphuric Acid.        Corrosive.       Packing Group II.        UN 1830 15. REGULATORY INFORMATION                                                               RISK PHRASES                                                               SAFETY PHRASES                                                               HAZARD SYMBOL LABELLING INFORMATION Contains 31% Sulphuric Acid R35 Causes severe burns S24/25 Avoid contact with skin and eyes S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice S27 Take off immediately all contaminated clothing S36/37/39 Wear suitable protective clothing, gloves and eye/face protection S45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) Corrosive 16. OTHER INFORMATION 1st February 2008 The information contained in this document is provided in accordance with the requirements of Chemicals (Hazard Information & Packing) Regulations.  The product should not be used for any purpose other than as stated on the label without obtaining specific written instructions directly from the supplier’s Head Office.  As specific conditions of use are out- side the supplier’s control the user is responsible for ensuring the requirements of relevant legislation are complied with.  The user assumes all liability for damage or injury caused from abnormal use, failure to follow recommended practices & any hazard inherent in the nature of the product.