Deep Cleaner & Descaler 
Foams - Clings - Cleans
Blitz V2 Foaming Spot Cleaner & Processor Rack / Tank Soak Cleaner
                                                                                                              
CtP Processors
Blitz V2 is designed to soak away heavy build-up of chemical residues caused by photopolymer and thermal plate
processing.  Blitz V2 cleans and removes calcium scale within the final rinse tank with ease.  Also available in 1 litre
foaming bottles for removing lighter build-up within tanks (for dye staining on rollers and processor casings see Sprint
V2).
Conventional Film, Plate Paper Processors
Blitz V2 Rapidly dissolves away all traces of heavily oxidised sticky developer and chemical build-up from racks and
tanks and algae or calcium build-up on racks or in wash tanks.  Blitz V2 also de-scales pipe-work and heat exchangers.  
Water Scale, Calcium & Algae Scale Remover
Use Blitz V2 in a soak solution 1:10 to soak away the contamination from wash tanks and racks.  Cleaned metal will
return to its original brightness.  After use simply put to drain.
Soak Clean With Blitz V2 Solution @ 1:5 to 1:10 dilution with water
Remove racks from tanks and soak for 2-4 hours. 
For a total deep clean and to de-scale pipe work and re-circulation system remove chemistry from tanks leaving racks in
situ.  Make up solution in tanks.  Turn processor on for 5-10 minutes to allow solution re circulate.  Switch processor off
and allow to stand for between 2-4 hours.  Drain down and rinse racks and tanks very thoroughly until water runs clear. 
Spot Clean Racks With Blitz V2 1 litre Foaming Bottle
New, easy to use Hydra Blitz V2, coats the racks with a fast acting, penetrating soft clinging foam.  Remove rack to be
cleaned.  Rinse off excess chemistry. Foam Blitz onto rack turning rollers to ensure even coverage.  Leave until 
contamination has dissolved.  This could be from 30 minutes to 2 hours on bad racks. Rinse off under pressure if 
possible.
N.B.  Whilst Blitz V2 does not have an unpleasant odour, on badly scaled racks the dissolving chemistry does, therefore
always use Blitz V2 in well ventilated areas or use the soak method with Blitz described above.
Note: For silver build-up on racks and tanks use Hydra DSC-100.                                           Ctp/Graphic/Mini Labs/NDT/04/2008
BLITZ V2
Hydra International Corporation Inc
The Pinnacle Building, 3455 Peachtree Road NE, Suite 500,  Atlanta GA 30326
Tel: 1-866-809-7286   Fax: 1-866-379-1229 
Deep Cleans & Removes Scale from All Types of CtP Thermal and Photopolymer Plate
Processors Together with Conventional Film, Plate & Paper Processors
Material Safety Data Sheet
  All the information on this sheet relates to the concentrated product only, in use dilution will decrease any possible hazard significantly.
Manufacturer
         
Hydra International Corporation Inc
The Pinnacle Building, 3455 Peachtree Road NE, Suite 500, Atlanta GA30326, USA
Tel: 1-866 809 7286       Fax: 1-866 379 1229 
E-mail:  sales@hydra-usa.com Web Site: www.hydra-usa.com
1.
IDENTIFICATION
Blitz V2
2.
COMPOSITION
An aqueous blend of Phosphoric Acid, Sulphuric Acid, Non-ionic and Cationic Surfactants, inhibitor, dye and per-
fume.  
3.
HAZARDS IDENTIFICATION
Product is an irritant
4.
FIRST AID MEASURES
EYES
Flush with copious amounts of water and seek medical advice
SKIN
Wash with soap and water
INHALATION
Seek fresh air
INGESTION
In the unlikely event of ingestion seek medical aid immediately
Give nothing by mouth to an unconscious person
5.
FIRE HAZARD &
FIRE FIGHTING PROCEDURES
Non flammable
6.
ACCIDENTAL RELEASE
MEASURES
SMALL SPILLS
Wash away with large amounts of water
LARGE SPILLS
Contain and cover spillage with neutralizing agent (Soda Ash).
Pick up and hold for waste disposal
7.
HANDLING AND STORAGE
Closed containers above 5
o
C.  Do not mix with other chemicals
8.
EXPOSURE CONTROLS AND
PERSONAL PROTECTION
RESPIRATORY PROTECTION
If local area ventilation insufficient wear respirator
VENTILATION
Use with good  ventilation
PROTECTIVE GLOVES
Wear PVC or Rubber Gloves
EYE PROTECTION
Wear safety goggles 
OCCUPATIONAL EXPOSURE LIMIT
None
9.
PHYSICAL AND CHEMICAL
PROPERTIES
PHYSICAL STATE
Liquid
COLOUR
Water White
ODOUR
Floral
FLASHPOINT
Non Flammable
SOLUBILITY
Water Soluble
SPECIFIC GRAVITY
1.140 + -0.01 @ 20
oC
10.
STABILITY & REACTIVITY DATA
CHEMICAL REACTIVITY
Reacts as an acid
STORAGE STABILITY
Stable
INCOMPATIBILITY
Do not mix with bleach or other chemicals
HAZARDOUS DECOMPOSITION
Toxic fumes may be produced
AND COMBUSTION PRODUCTS
11.
TOXICOLOGICAL INFORMATION
EYES
Irritant
SKIN
Irritant
INHALATION
Irritant
INGESTION
Harmful
12.
ECOLOGICAL INFORMATION
Not classified as dangerous to the environment 
13.
DISPOSAL CONSIDERATION
As per current rules of local authority
14.
TRANSPORTATION INFORMATION
Not dangerous for transport 
15.
REGULATORY INFORMATION
                                                            RISK PHRASES
                                                           SAFETY PHRASES
                                                          HAZARD SYMBOL
LABELLING INFORMATION
R38
Irritating to skin
R41
Risk of serious damage to eyes
S24/25
Avoid contact with skin and eyes
S26
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
S39
Wear eye/face protection
Irritant
16.
OTHER INFORMATION
1st February 2008
The information contained in this document is provided in accordance with the requirements of Chemicals (Hazard Information & Packing) Regulations.  The product should not be used
for any purpose other than as stated on the label without obtaining specific written instructions directly from the supplier’s Head Office.  As specific conditions of use are outside the sup-
plier’s control the user is responsible for ensuring the requirements of relevant legislation are complied with.  The user assumes all liability for damage or injury caused from abnormal use,
failure to follow recommended practices & any hazard inherent in the nature of the product.